Welcome to Record Products of America, Inc.

Combination I.D. & O.D. Optical Stamper Punch

Model P-114  DVD Quality

FEATURES:

  • Simple touch screen controls and large flat panel TFT monitor for convenient viewing.
  • Optically aligns CD Stamper & simultaneously punches the I.D. & O.D.
  • Punches the center hole to data track within  an average of 3.5 microns  ECC .
  • Quick Change I.D. Tooling now available. I.D. changes possible in minutes while O.D. remains stationary in tooling.
  • Quick-Change Tooling made to customer's specifications.
  • High Definition Lens with fiber optic light source
  • Optical Closed Circuit Video Camera and Lens System with 1250 to 1 Magnification  
  • Fiber Optic Halogen Light Source.
  • Excellent clearance between punch and die for easy handling of stampers
  • Stand-up and bench-top units available. Contact RPA for specifications.
  • Precision Micrometers used to position the stamper.

SPECIFICATIONS:

Electrical Supply Requirements: 220/440 VAC
10.6/5.3 Amps
50/60 Hz 3 Phase
Hydraulic Ram: 12 Tons Capacity
Control System: Automatic PLC
Air Pressure: 70 PSI
7.1 CFM
Machine Dimension:
Depth: 35" 89 cm
Width: 50" 127 cm
Height: 69" 175 cm
Weight: 2,400 lbs. 1,010 kg

Click to download  Brochure for Model P-114

p1-1.jpg (35681 bytes)
Click on photo for detailed image



CE APPROVED


Combination I.D. & O.D. Optical Stamper Punch

P-114-3 (Compact Bench Model)
DVD Quality

FEATURES:

  • Optically aligns CD Stamper and simultaneously punches the I.D. & O.D.
  • Punches Center Hole to data track to within 5 microns total ECC reading.
  • "New" Quick Change I.D. Tooling Now Available. I.D. Changes possible in minutes while O.D. remains stationary in Tooling.
  • Quick-Change Tooling made to Customer Specifications.
  • High Definition Lens with Fiber Optic Light Sources.

SPECIFICATIONS:

Electrical Supply Requirements:

220/440 VAC
10.6/5.3 Amps
50/60 Hz 3 Phase


Hydraulic Ram:
12 Tons Capacity

Air Pressure:
70 PSI

Machine Dimension:
Weight: 800lb 365 kg
Height: 43.5" 1,105 mm
Width: 26.0" 660 mm
Depth: 32.5" 825 mm

With its small foot print, this unit can sit on a table as small as 26" wide x 25" deep (660mm x 635mm).
Available with table.
Set Up Clearance:
Right Side and Rear 6" 50 mm
Left Side 15" 380 mm
Top 20" 500 mm

Front: Front feet should be positioned within 1" (25mm) of the front edge of the bench.


Click on photo for detailed image

Click on photo for detailed image

QUICK CHANGE TOOLING
for the combination I.D. & O.D. Optical Stamper Punch

Models P-114, P-114-3 & P-115

  • Punches the I.D. & O.D. simultaneously & consistently to the lowest ECC measurement in the industry.
  • One piece upper & lower assembly can be changed in less than 30 minutes complete.
  • Fully assembled, factory adjusted and ready to install to customer specifications.
  • Fits all RPA Stamper Punches old and new.
  • Also can be supplied as Quick Change I.D. tooling. Changes in minutes.

Click on photo for detailed image

QUICK CHANGE I.D. TOOLING
for the combination I.D. & O.D. Optical Stamper Punch

Models P-114, P-114-3 & P-115

Same as Quick Change Tooling facts in addition to the following
  • I.D. Tooling interchangeable in 5 to 7 minutes withhout removing O.D. Die.
  • Fits all RPA Stamper Punches old and new.
  • Available in sizes from 18mm to 38mm I.D.

Main Page | Company Profile | Specialty Services | Backsanding Machine
I.D. & O.D. Optic Stamper Punch | Protective Tape Coater | Rapid Change I.D. Punch
Quick Change Tools | Workholders | Spindles | Eccentricity Checking | CD Counter | Index by Model Number
Record Products of America, Inc.
Equipment for the Compact Disc Industry
700 Sherman Avenue
Hamden, CT 06514 USA
Tel: 203-248-6371
Fax: 203-248-3733
e-mail: info@recordproducts.com